John Guest Products
swtwater.com ASVPP Angle Stop Adapter Valves
John Guest ASVPP Inch-Size Polypropylene Angle Stop Adapter Valve
NSF International Standard 51 and 61.
  All ASVPP Angle Stop Adapter Valves are produced in FDA approved materials.  
   
ASVPP Angle Stop Adapter Valves are manufactured in white polypropylene with food grade EPDM O-rings. They connect between the cold water supply valve and the riser hose (see below for connection details), to the main water supply line, for applications in reverse osmosis, filtration systems, automatic coffee brewers, ice-makers, and many more.

ASVPP Valves are NOT to be used with compressed air, explosive gases, petroleum spirits and other fuels, or for heating systems. FOR COLD WATER SUPPLY USE ONLY.

All ASVPP Angle Stop Adapter Valves are Lead Free.

Working Pressures and Temperatures
Water: Max. 150 psi at 70°F (max. 10 bar at 20°C)
Max. 60 psi at 140°F (max. 4 bar at 60°C)
Min. 34°F (1°C)
 
Angle Stop Adapter Valve
Angle Stop Adapter Valve
Part
Number
Thread Male
Compression
Thread Female
Compression
Tube
OD
ASVPP1LF 3/8 3/8 1/4
ASVPP2LF 3/8 3/8 3/8
 
Angle Stop Adapter Valve with Conversion Adapter
Angle Stop Adapter Valve with Conversion Thread
Part
Number
Thread Male
Female NPS
Thread
Compression
Tube
OD
ASVPP5LF 1/2 3/8 1/4
ASVPP6LF 1/2 3/8 3/8
         
  Conversion Adapter 1/2 x 1/2 NPS Assembly   Conversion Adapter 3/8 x 3/8 Compression Assembly  
The Conversion Adapter can be threaded to either side
of the valve to make configurations of 1/2" x 1/2" NPS
or 3/8" x 3/8" Compression.
 
How to connect the Angle Stop Adapter Valve
Step 1. Connecting Angle Stop Adapter Valve  Step 2. Connecting Angle Stop Adapter Valve  Step 3. Connecting Angle Stop Adapter Valve  Step 4. Connecting Angle Stop Adapter Valve
Step 5. Connecting Angle Stop Adapter Valve  Step 6. Connecting Angle Stop Adapter Valve  Step 7. Connecting Angle Stop Adapter Valve
Angle Stop Adapter Valve Connection
1. Shut off water supply at brass/chrome cold water supply valve.
2. Disconnect riser hose from brass/chrome supply valve.
3. Ensure that the sealing gasket is fully seated into the Angle Stop Adapter Valve female thread.
4. Install Angle Stop Adapter Valve on cold water supply valve.
5. Connect the riser hose to the Angle Stop Adapter Valve.
6. Fully insert tubing into the Speedfit® side of the valve.
7. Open valves and check for leaks.
 
See more John Guest products available from SWT.
 
 
 
Safe Water Technologies, Inc.
996 Bluff City Boulevard
Elgin, IL 60120 USA
 
 
Telephone: +1.847.888.6900
Facsimile: +1.847.888.6924
E-mail: info@swtwater.com
https://www.swtwater.com

Last Updated: March 8, 2023