|
|
| SWT’s Media Loading Funnels are simply designed to
efficiently load underbedding and media into residential, commercial,
and industrial tanks with 2.5, 4, 4.5, or 6 inch openings. |
| |
| |
 |
 |
SM-F250
RESIN FUNNEL FOR
2.5” TANK OPENING
(100% POLYETHYLENE)
|
SM-F400
RESIN FUNNEL FOR
4” TO 6" TANK OPENING
(100% POLYETHYLENE)
|
|
| |
| |
| |
DIRECTIONS FOR USE: |
|
| 1. |
Place the vessel in the desired location, then level and stabilize it. |
| 2. |
Cover the top of the riser tube (a PVC plug or cap is recommended) before loading the media. This is
necessary to keep the media from going down the riser tube and internally restricting the bottom distributor.
Make sure that the riser tube is centered in the vessel before loading the media. |
| 3. |
Fill the vessel 1/3 full of water. This will reduce the chance of damage to the distribution system
when loading the vessel with media. |
| 4. |
Using a funnel, slowly add the underbedding (gravel, anthracite, garnet, etc.) to the vessel. |
| 5. |
Using a funnel, slowly add the resin or filtration media to the vessel. |
| 6. |
After loading the required amount of media, remove the funnel, clean the tank threads, and remove
the cover from the riser tube before mounting the control valve assembly. |
|
|
|
| |
|
