|
|
| SWT’s Amalgam Lamp UV Systems are
designed for full penetration UV dosing with smaller footprint requirements and reduced operating costs.
These full-featured 316L stainless steel systems are designed for the most demanding of
disinfection applications and engineering designs. All units are available in 254nm or 185nm UV wavelengths. |
| |
|
|
Whether it is wastewater, potable water, high purity, USP, TOC, or ozone destruct applications, let SWT
help you reduce your operating costs and specify the proper equipment for your applications. |
| Standard Features |
| • |
316L stainless steel polished contact chamber |
| • |
Flexible vertical or horizontal installation |
| • |
Nema 4X stainless steel control panel |
| • |
Amalgam low pressure ultraviolet lamp technology |
| • |
Digital ultraviolet intensity monitor with alarm |
| • |
Remote on/off switch |
| • |
Temperature overheat control |
| • |
Elapsed time meter |
| • |
Available in all international voltages |
|
|
|
| |
| |
 |
| |
| |
| UVI Series Ultraviolet Systems |
Part
Number |
In/Out
Flange
Size
Inches |
No.
of
Lamps |
Power
Watts |
Full
Load
Current
Amps |
Flow Rate, GPM |
Shipping
Dimensions
(L x W x H)
Inches |
Shipping
Weight
Lbs. (Kg.) |
Clear,
Fresh
Water |
DI & RO
Water |
Waste
Water |
TOC OR
Ozone
Destruct |
| UVI-0040 |
1.5 |
1 |
170 |
3.0 |
40 |
50 |
25 |
15 max. |
44 x 18 x 23 |
110 (50) |
| UVI-0065 |
2 |
1 |
170 |
3.0 |
65 |
85 |
40 |
26 max. |
44 x 20 x 30 |
140 (64) |
| UVI-0110 |
2 |
2 |
280 |
5.0 |
110 |
140 |
70 |
46 max. |
44 x 20 x 30 |
150 (68) |
| UVI-0155 |
4 |
2 |
280 |
5.0 |
155 |
200 |
100 |
66 max. |
44 x 20 x 30 |
165 (75) |
| UVI-0230 |
4 |
3 |
400 |
6.0 |
230 |
295 |
150 |
98 max. |
44 x 20 x 30 |
210 (95) |
| UVI-0350 |
4 |
3 |
625 |
8.0 |
350 |
450 |
225 |
150 max. |
59 x 30 x 30 |
275 (125) |
| UVI-0480 |
6 |
4 |
780 |
10.0 |
480 |
610 |
310 |
200 max. |
59 x 30 x 30 |
285 (129) |
| UVI-0560 |
6 |
3 |
930 |
8.0 |
560 |
725 |
365 |
240 max. |
79 x 30 x 30 |
340 (154) |
| UVI-0695 |
6 |
6 |
1100 |
15.0 |
695 |
875 |
450 |
290 max. |
59 x 30 x 30 |
335 (152) |
| UVI-0780 |
6 |
4 |
1200 |
10.0 |
780 |
975 |
505 |
325 max. |
79 x 30 x 30 |
360 (163) |
| UVI-0875 |
6 |
8 |
1425 |
15.0 |
875 |
1,060 |
555 |
350 max. |
59 x 30 x 30 |
385 (175) |
| UVI-1120 |
6 |
6 |
1720 |
15.0 |
1,120 |
1,410 |
725 |
470 max. |
79 x 30 x 30 |
390 (177) |
| UVI-1345 |
6 |
8 |
2250 |
15.0 |
1,345 |
1,700 |
875 |
560 max. |
79 x 30 x 30 |
410 (186) |
|
Optional manual or automatic wiping mechanisms are
available. Contact your SWT representative for details.
Disinfection Dose Level: 30 µw sec/cm² @ 95% UVT, after 9000 hours of operation. Other dosages available.
TOC or Ozone Destruct Level: Minimum 90 µw sec/cm² @99% UVT, after 9000 hours of operation.
UV dosages are application dependent. Consult factory. |
| |
| |
| UVI Series Optional Features |
| |
|
| WIPING SYSTEMS |
| — |
Manual Wiping System for UVI-0110, 0155, 0230 Systems
|
| — |
Manual/Automatic Wiping System for UVI-0350, 0480, 0560, 0695, 0780, 0875, 1120, 1345 Systems
|
| |
|
| |
|
| UVI Series Replacement Parts |
| |
|
| UV LAMPS |
| — |
UV Lamp for UVI-0040, 0065, 0110, 0155, 0230 Systems
(P/N IL-T1AM) |
| — |
UV Lamp for UVI-0350, 0480, 0695, 0875 Systems
(P/N IL-T1AS) |
| — |
UV Lamp for UVI-0560, 0780, 1120, 1345 Systems
(P/N IL-T1AL) |
| |
|
| QUARTZ SLEEVES |
| — |
Quartz Sleeve for UVI-0040, 0065, 0110, 0155, 0230 Systems
(P/N IL-T3AM) |
| — |
Quartz Sleeve for UVI-0350, 0480, 0695, 0875 Systems
(P/N IL-T3AS) |
| — |
Quartz Sleeve for UVI-0560, 0780, 1120, 1345 Systems
(P/N IL-T3AL) |
| |
|
| O-RING |
| — |
O-ring for all UVI Series Systems
(P/N IL-T3ORING) |
| |
|
|
| |
|
