| SWT Resin and Media Extractors |
|
High Flow Mineral Extractor |
SWT’s High Flow Mineral Extractor offers an inexpensive way of removing the expelled bed of any size or height
tank without removing the tank. It works with water pressure, not suction. It will work on any and
all type beds, and will even remove the gravel bed if needed. It is available for tanks with 2.5 inch or 4 inch top openings. |
|
Mineral Extractor for CDS & Vortech |
SWT’s Mineral Extractor for Cyclonic Distributor System (CDS) and Enpress Vortech is designed
for use on chambered tanks with a 2.5 inch neck and a fixed riser tube. The offset center tube of the mineral
extractor will slide along the side of the tank’s stationary riser tube. |
| SWT Resin and Media Loaders |
|
Resin Loaders |
SWT’s Resin Loaders have been designed to work with Rigid brand or similar type vacuum hose.
No gaskets are required for the operation of these resin loaders. Two lengths of 2.275 inch O.D. vacuum hose
and a vacuum are all that is required to operate the loaders. (Vacuum hose and vacuum not supplied with loaders.) |
|
Funnels |
SWT’s Media Loading Funnels are simply designed to efficiently load underbedding and media into
residential, commercial, and industrial tanks with 2.5, 4, 4.5, or 6 inch openings. |
