4 inch with End Ports
8 inch with End Ports
8 inch with Side Ports
|
|
The strict requirements and diverse applications of the membrane separations industry has
brought forth a new generation of corrosion resistant filament-wound fiber reinforced plastic (FRP) pressure vessels. These vessels are
manufactured over precision mandrels, using a superior epoxy resin, resulting in the ultimate finished inside surface. To fabricate
these vessels, SWT has carefully selected optimal grade construction materials, which provide strength and reliability, guaranteeing
unparalleled performance. Each pressure vessel is tested according to the requirements of ASME Code Section X, the internationally
recognized standard for pressure vessel construction.
Benefits:
- Proven reliability with ISO 9001 quality systems certification
- Non-corrosive filament wound materials of construction
- Seawater, backwash, and tap water applications
- High performance
- State-of-the-art precision manufacturing techniques
- Flexibility of an end port or side port configuration
Technical Specifications:
- Accommodates any model of 4” or 8” diameter, 40” or 60” long, RO/NF/UF spiral wound membrane elements.
- Designed and tested with a safety factor of six times the working pressure.
- Designed and tested to withstand a minimum of 100,000 cycles.
- Each vessel is factory tested at 1.5 times the maximum working pressure.
- Sanitary fittings are available upon request.
- Available Working Pressures (PSI): 300, 400, 600, 1000, 1200
|
